Shows a milling cutter with internal coolant supply (IKZ) once standing, once rotating. A lubricant with a fluorescent marker is used for this. The fluorescent lubricant lights up brightly and is clearly visible. Research result from Unilube in minimum quantity lubrication. Future Concepts

Fluorescent high-performance lubricant

Process monitoring at the key point Does effective process monitoring of minimum quantity lubrication in machine tools have an opportunity? …

Shows a pile of metal shavings. Symbol for effective metal chip recycling with Unilube. Technical talk

Metal chip recycling

Value-adding, future-proof and sustainable method for recycling metal chips. Metal chips covered with traditional cooling lubricants are sooner or later …

Shows a frozen ice sheet with trapped air bubbles. Symbol for the cold in cryogenic machining with Unilube. Future Concepts

Product concept of cryogenic minimum quantity lubrication

Cryogenic machining combined with minimum quantity lubrication: The idea is not new and various studies have already been conducted about …

Shows the logo of the specialist magazine Machines Production, subject of metalworking Press article

Machining performance and environmental compliance

The following press article was published in the special edition no. 1089 of “Machines Production” on 30 April 2020 on …

Shows three indexable inserts, two of which are wetted with lubricant. Fluorescent marker is added to a lubricant. The fluorescent lubricant lights up brightly and is clearly visible. Research result from Unilube in minimum quantity lubrication. News

Innosuisse approves preliminary study

We are delighted that Innosuisse, the Swiss agency for promoting innovation, has approved and will support a research project initiated …

Shows a half-ring nozzle from Unilube, for the use of minimum quantity lubrication. Product news

New product, semi-annular nozzle

For best results: Quasi-dry machining Unilube generally recommends using tools with internal cooling, where the high-performance lubricant reaches its point …

Shows a laser sensor which measures the exact delivery rate of a Unilube minimal lubrication system via the end stop of the dosing pump. Future Concepts

Process monitoring of minimum quantity lubrication

Process reliability above all else We see the general efforts towards digitisation, besides the realisation of new business models, as …

Shows the machine room of a Tornos lathe during a test of the Unilube minimum quantity lubrication. Technical talk

Quasi-dry machining on the lathe

Interesting challenge We were given the opportunity to prove the performance of our innovative total-loss lubrication at the well-know machine …

Shows a FLEXLINE nozzle arm from Unilube. Product news

New product, FLEXLINE nozzle arm

Flexible where space is tight The new FLEXLINE nozzle arm can easily be repeatedly bent by hand. It adapts to …

Shows aluminum chips on a machine table after using Unilube minimum quantity lubrication. Technical talk

Conventional roughing

Every year, apprentices in the metal industry take their first steps in metal machining on conventional lathes and milling machines. …